Fishing QuestionsCategory: QuestionsHow to add line to fishing reel?
Uichall Y asked 3 weeks ago
How to add fishing line to a reel?

6 Answers
Carlos answered 2 weeks ago
To add a line to your fishing reel, first remove the spool from the reel. Cut an 18- to 24-inch piece of monofilament or braided line and tie one end to the eyelet or screw on the spool. Run the line around the reel’s base, then tie it to the other eyelet or screw. Finally, reattach the spool to the reel.

Martin Staff answered 2 weeks ago
There are a few methods that can be used to add a line to a fishing reel. One is to use a line guide, which is a small metal or plastic cylinder that slides over the fishing line and helps keep it in place as it’s being spooled onto the reel.

Another option is to use what’s known as a “line winder”, which is simply a tool that helps you wrap the line around the spool more quickly and evenly. Finally, you can also just use your fingers to guide the line onto the spool while turning the reel by hand. Whichever method you choose, be sure to avoid kinks or knots in the line, as they can weaken it and lead to breakage.

Alex – ProFisherman Staff answered 2 weeks ago
There are a few ways to add a line to a fishing reel. One way is to use the guides on the reel to wind the line around the spool. Another way is to feed the line directly onto the spool by holding one end and letting it slip off your fingers while you spin the reel with your other hand. Make sure to keep enough tension on the line so it doesn’t get tangled as you’re adding it.

Wilson answered 2 weeks ago
There are a few ways to add a line to a fishing reel, but the most common is to use what’s called a line spool. This is a small spool that holds the new fishing line, and you can either buy one or make your own.

To add the new line to the reel, first, remove the old line by cutting it as close to the reel as possible. Then, tie one end of the new line around the small post on top of the spool and hold on while you spin the spool with your other hand. The spinning will wrap the new line around the spool. When you get close to where you want it to stop, tie off the other end of the line and cut any excess. You’re now ready to start fishing with your new line!

If you don’t want to use a spool, another option is to simply tie the new line directly onto the reel. Start by feeding the end of the line through all of the guides on the reel (this will help keep it from tangling as you’re reeling in a fish). Then, tie the end of the line onto the small post on top of the reel. You can now start fishing with your new line!

No matter which method you choose, be sure to add a bit of extra line to the reel before you start fishing. This way, if you do happen to get a bite, you won’t have to worry about the line running out before you can reel in your fish. Good luck and happy fishing!

David answered 2 weeks ago
To add a line to a fishing reel, first, determine how many lines you need. Make sure you have enough lines to reach the place where you will be fishing. Once you have determined how many lines you need, cut the line to the correct length and tie a loop in one end of the line.

Thread the other end of the line through the open spool on your fishing reel. You may need to use a pencil or screwdriver to help get the end of the line through the spool. Pull enough of the line through the spool so that there are about six inches of slackline hanging from the reel.

Tie another loop at this end of the line and make sure it is secure. Finally, cut the tag ends of the line close to the knots. Your fishing reel is now ready to use!

If you’re having trouble adding a line to your fishing reel, there are a few things you can try. First, make sure that the spool is empty and that there’s no old line still attached. Next, try using a line winder to help you wrap the new line around the spool more quickly and evenly.

Finally, if all else fails, you can always just use your fingers to guide the new line onto the spool while turning the reel by hand. Whichever method you choose, be sure to avoid kinks or knots in the line, as they can weaken it and lead to breakage.

Bernard answered 2 weeks ago
The process for adding a line to a fishing reel is relatively simple. However, it is important that the line is added in the correct order to prevent any tangles.

To add a line to a fishing reel:

1) Remove the spool cap by unscrewing it counter-clockwise.

2) Feed the end of the new line through the hole in the spool and attach a line weight or bobber stop.

3) Wind 15-20 turns of line around the spool, making sure not to cross over previous lines.

4) Feed the remaining line through guides on top of the reel and attach the leader (if using).

5) Replace the spool cap and tighten it securely by screwing it clockwise.

Now your fishing reel is ready to use with a new line! Remember to always check your lines before each fishing trip for any nicks or wear, and replace them as necessary.