Fishing QuestionsCategory: Fishing Lure FAQHow to make rubber fishing lures?
John J. Sanders asked 1 month ago
How to make rubber fishing lures at home?

6 Answers
Wilson answered 1 month ago
There are a few different ways to make rubber fishing lures. The most common way is to use a mold. You can either make your own mold or you can buy a mold.

If you want to make your own mold, you will need some silicone caulk, a bucket, and an object that is the same shape as the lure you want to make. First, cut the caulk into small pieces and put it in the bucket.

Next, heat up the object that you want to use as the mold (a stove or microwave will work). Then, pour the hot object into the bucket of caulk and stir until it is mixed in. Finally, pour the mixture into the desired shape and let it cool.

Martin Staff answered 1 month ago
There are a few ways to make rubber fishing lures. One way is to use a mold. You can either make your own mold or you can purchase a mold. You will need some type of silicone to make the mold. The silicone can be found at most hardware stores.

Another way to make rubber fishing lures is by using a vacuum-form machine. This method is a bit more difficult, but it does give you more control over the shape and size of the lure. You can find vacuum form machines at most plastics stores.

The easiest way to make rubber fishing lures is by using a hot melt gun. This method doesn’t give you as much control over the shape and size of the lure, but it is the quickest and easiest way to make them. You can find hot melt guns at most hardware stores.

Once you have your mold or vacuum form machine, you will need to choose a rubber fishing lure design. There are many different designs available. You can find these designs online or in fishing magazines.

After you have chosen a design, you will need to gather the supplies needed to make the lure. These supplies can be found at most fishing stores.

Once you have all of your supplies, you are ready to begin making your rubber fishing lures. Follow the instructions that came with your mold or vacuum form machine to create your lures.

If you are using a hot melt gun, simply place the rubber fishing lure design onto the gun and heat it until the rubber is melted. Then, carefully place the molten rubber onto your mold or fishing line and allow it to cool.

Once your rubber fishing lures are cooled and set, you can start fishing with them! Experiment with different colors and designs to see what works best for you. With a little practice, you’ll be fishing like a pro in no time!

Bernard answered 1 month ago
There are a few ways to make rubber fishing lures. You can start with a basic, simple design and then add on complexity as you get more comfortable with the process.

One way to make a rubber fishing lure is to start with a basic soft-bodied lure body and then add a hard plastic lip or bill. To do this, you’ll need an oven or microwave, hard plastic (like an old credit card), scissors, and some silicone sealant.

Start by heating up the plastic in the oven or microwave until it’s soft and pliable. Cut out the shape of the bill or lip from the heated plastic, then use the silicone sealant to attach it to the body of the lure. Let everything dry completely before using your new lure.

Another way to make a rubber fishing lure is to start with a hard plastic body and then add a soft-plastic skirt. To do this, you’ll need an oven or microwave, hard plastic (like an old credit card), scissors, and some silicone sealant.

Start by heating up the plastic in the oven or microwave until it’s soft and pliable. Cut out the shape of the body from the heated plastic, then use the silicone sealant to attach a soft-plastic skirt. Let everything dry completely before using your new lure.

Making your own fishing lures can be a fun and rewarding hobby. Experiment with different designs and materials to create lures that are unique to you.

Carlos answered 1 month ago
If you’re looking to add a little something extra to your fishing lures, consider adding a layer of rubber. This can give them a more lifelike appearance and Feel, as well as make them more durable. Here’s a quick guide on how to make rubber fishing lures:

1. Cut the rubber into thin strips using sharp scissors or a razor blade. You’ll want the strips to be about 1/8-inch thick and 3-inches long.

2. Place the strips onto the lure body, starting at the nose and working your way back. Overlap the pieces slightly so that they adhere evenly to the shape of the lure.

3. Once you’ve covered the entire lure body, use a heat gun or lighter to carefully seal the rubber strips in place. Be sure to hold the heat source about 6-inches away from the surface so you don’t melt or distort the rubber.

4. Allow the lure to cool completely before using it. You may want to add a coat of clear paint or lacquer to further seal and protect the rubber.

With a little bit of effort, you can create fishing lures that are sure to attract attention – and catches!

David answered 1 month ago
Deciding to make your own rubber fishing lures is a great way to save money and get creative with your tackle. Rubber lures are relatively easy to make, and the process can be quite rewarding. With a little time and effort, you can create unique lures that are sure to attract fish.

To get started, you will need some basic supplies. First, you will need patience wire. This can be purchased at most craft stores or online retailers specializing in fishing tackle. Next, you will need a mold for your lure.

There are many different molds available on the market, or you could opt to create your own custom mold. Finally, you will need a liquid rubber casting compound. This can also be found at most fishing tackle retailers or online.

Once you have gathered your supplies, the first step is to create your mold. If you are using a store-bought mold, simply follow the instructions that come with it. If you are making your own mold, you will need to start by creating a negative of your desired lure shape. To do this, you can use clay, plaster of Paris, or another similar material. Once you have created your negative, line it with a release agent such as petroleum jelly.

Once your mold is ready, it’s time to start working with the rubber compound. Begin by mixing the compound according to the manufacturer’s instructions. Once it is thoroughly mixed, pour it into your mold. Be sure to fill the mold completely, as any air pockets will result in a weak spot in your lure.

After the mold is filled, allow it to cure according to the manufacturer’s instructions. Once it is fully cured, you can remove your lure from the mold. If necessary, trim away any excess rubber with a sharp knife. Your lure is now ready to use! Try fishing with it in different waters to see what kinds of fish you can attract.

Making your own rubber fishing lures is a great way to save money and get creative with your tackle. With a little time and effort, you can create unique lures that are sure to attract fish.

Alex – ProFisherman Staff answered 1 month ago
These days, there are a lot of different rubber fishing lures on the market. But if you’re the DIY type, you might be wondering how to make your own. Here’s a quick guide on how to do it.

First, you’ll need some supplies. For the body of the lure, you can use an old inner tube or swimming pool noodle. You’ll also need some hard rubber or plastic for the lips, and a few other smaller parts like BBs or bearings for weight. You’ll also need some wire for construction, pliers for bending it, and scissors or a knife for cutting everything to size.

As far as putting it all together, there are a few different ways to do it. One popular method is to use a two-part molding process, where you first create a negative mold of the lure (using something like silicone or latex), and then pour in the rubber to create the positive. This can be a bit tricky to get right, so if you’re just starting out you might want to try a simpler method.

One way to do this is to start with the lips. Cut a piece of hard rubber or plastic to the desired shape, and then use wire to attach it to the body. Once the lips are in place, you can add any other smaller parts like BBs or bearings for weight. Finally, use pliers to create any desired shapes or features in the wire, and then cover everything with a layer of rubber.

Another method is to start with the body, and then add the smaller parts and features as you go. This can be done by cutting the body to the shape of an old inner tube or swimming pool noodle and then attaching the smaller parts with wire. You can then add the lips last, or create any other desired features.

Once you have the basic shape of the lure created, you can then add any desired details or colors. One way to do this is to use a sharpie or other permanent marker to color the rubber. You can also experiment with adding different materials like feathers or sequins to the surface of the lure.

With a little bit of creativity, you can create all sorts of different rubber fishing lures. So get creative and see what you can come up with!